2020B Lathe, 2HP, 1 or 3PH, 220V
- Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments
- Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features
- Set of dead centers which hold a spindle for visual comparison
- Redesigned tool rest geometry allows for better chisel movement along the tool rest
- Laser etched quill is self-ejecting.
- Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
- Attached tool caddy allows convenient access to centers, wrenches, etc.
- Tailstock has internal storage for additional accessories
- Chrome trimmed handwheels are ergonomic for a comfortable feel
- Standard Equipment:
| Motor Phase | 3 |
| Speed Range | 50-3200 |
| Spindle Threads (In.xTPI) | 1-1/4 x 8 |
| Centerline of Spindle to Floor (In.) | 44 (adjustable) |
| Spindle Bore | 5/8 |
| Headstock Movement | Full Length of Bed |
| Wiring Remarks | VFD will accept 1 or 3 phase power |
| Spindle Taper | MT-2 |
| Number of Indexing Positions | 48 |
| Swing Over Tool Rest Base (In.) | 17 |
| Motor Power (HP) | 2 |
| Outboard Turning | 88 |
| Distance Between Centers (In.) | 20 |
| Motor Current (Amps) | 6.2 |
| Spindle Speeds | High 125-3200/Low 50-1200 |
| Ram Travel Quill Travel | 4-1/2 |
| Bed Construction | Cast Iron |
| Recommended Circuit Size (Amps.) | 20 |
| Quill Taper | MT-2 |
| Tailstock Bore | 3/8 |
| Outboard External Threads (In.xTPI) | 1-3/16-18 UNC |
| Swing Over Bed (In.) | 20 |
| Motor Voltage (V.) | 230 Only |
| Bed Gap (In.) | 2-1/2 |
There are no reviews yet
| Manufacturer warranty | ||
| 5 Year | ||
| Warranty details | ||
|
|
||
