OES9138 Sander, 3HP 3PH 230/460V
- 3HP motor with 9" x 138-3/4" abrasive belt handles large workpieces
- Oscillates 24 cycles per minute for better finish and longer belt life
- 9-1/2" x 48" platen with graphite pad offers largest work surface in its class
- Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
- Pedestal control switch for easy access
- Large 11-3/4" x 48" front worktable with 8" vertical travel and 45° tilt, includes miter head for angle work
- Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
- Large radius end table has 6" vertical travel and 45° tilt for any angle and working height needed
- Heavy-duty oscillating gearbox and shaft for long maintenance-free use
- Hinged guard opens for infinite length sanding
| Style (Type) | Horizontal/Vertical Oscillating Edge |
| Motor Phase | 3 |
| Oscillations Per Minute | 24 |
| Motor Power (HP) | 3 |
| Sandling Belt Size (LxW)(In.) | 9 x 138-3/4 |
| Table Height from Floor (In.) | 34-1/2 - 40-3/4 |
| Recommended Circuit Size (Amps.) | 15/10 |
| Dust Port Outside Diameter (In.) | 4 |
| Dust Collection CFM Required (CFM) | 1,100 |
| Plate Size (In.) | 9-1/2 x 48 |
| End Table Size (In.) | 18 |
| Belt Speed (FPM) | 3542 |
| Main Table Size (LxW)(In.) | 48 x 11-3/4 |
| Main Table Tilt (Deg.) | 5 In, 45 Out |
| Motor Voltage (V.) | 230/460 |
| Electrical Controls | Magnetic Starter |
| Drum Diameter (In.) | 4 Outboard, 9 Drive |
| End Table Tilt (Deg.) | 40 In, 45 Out |
| Prewired Voltage (V.) | 230 |
There are no reviews yet
| Manufacturer warranty | ||
| 5 Year | ||
| Warranty details | ||
|
|
||
