PJ1696 Jointer, 7.5HP 3PH 230/460V
- Helical cutterhead with 2-sided knife inserts reduces noise, eliminates adjustments and speeds knife changes
- Parallelogram construction maintains close table-to-cutterhead proximity and ensures table parallelism
- Large 96" x 16" table surface for maximum support and fine finish
- Rack and pinion adjustable cast iron fence system for smoother fence positioning and sturdy work support
- Full size rabbeting table supports large workpieces for rabbets up to 3/4" deep
- 7.5HP Motor for industrial duty
- Standard Equipment:
- Helical cutterhead with inserts
- Tilting fence
- Dust collection adaptor
| Rabbeting Capacity (In.) | 3/4 |
| Table Size (LxW)(In.) | 96 x 16 |
| Rabbeting Ledge (In.) | 5 x 24-1/2 |
| Dust Port Outside Diamter (In.) | 6 |
| Motor Power (HP) | 7-1/2 |
| Cutterhead Speed (RPM) | 5,200 |
| Fence Positive Stops (Deg.) | 45, 90, -45 |
| Cutterhead Diameter (In.) | 4 |
| Outfeed Table Length (In.) | 47-1/4 |
| Motor Voltage (V.) | 230/460 |
| Dust Collection Minimum CFM Required (CFM) | 800 |
| Cutting Capacity (WxD)(In.) | 16 x 3/4 |
| Prewired Voltage (V.) | 230 |
| Motor Phase | 3 |
| Number of Knives | 58 |
| Cuts Per Minute | 20,800 |
| Recommended Circuit Size (Amps.) | 30/15 |
| Fence Tilt (Deg.) | 45 Forward, 45 Backward |
| Fence Size (LxH)(In.) | 47-1/4 x 5-1/4 |
| Table Height from Floor (In.) | 37-1/2 |
| Infeed Table Length (In.) | 47-1/2 |
| Standard Knife Size (LxWxT)(mm) | 30 x 12 x 2 |
There are no reviews yet
| Manufacturer warranty | ||
| 5 Year | ||
| Warranty details | ||
|
|
||
