PM2244 Drum Sander, 1-3/4HP, 115V
- Integrated LED Control Panel shows power, belt speed, and DRO
- Equipped with Feed Logic to produce exceptional finish while preventing machine overload
- Table parallelism is adjusted with a dial on the outside of the conveyor bed, eliminating adjustments to the entire drum carriage
- Secondary, absolute depth scale provides an additional height reading
- Drum carriage is designed to provide strength and consistent performance over time
- Steel hood with a 4" dust port provide excellent dust collection
- Emergency stop for quick shutoff
- Large, chrome handwheel makes adjusting the drum height smooth and simple
- Belt tracking is designed to reduce the need for manual adjustment
- Integrated casters make it easy to move unit around the shop
| Drum Length (In.) | 22 |
| Conveyor Speed (FPM) | variable 0 - 10 |
| Motor Phase | 1 |
| Drum Diameter (In.) | 5 |
| Maximum Board Thickness (In.) | 4 |
| Motor Current (Amps) | 14 |
| Motor Voltage (V.) | 115 only |
| Minimum Board Thickness (In.) | 1/32 |
| Number of Sanding Drums | 1 |
| Motor Power (HP) | 1-3/4 |
| Minimum Board Length (In.) | 2-3/8 |
| Conveyor Motor (HP) | 1/30 |
| Dust Collection Minimum CFM Required (CFM) | 800 |
| Dust Port Outside Diameter (In.) | 4 |
| Maximum Board Width (In.) | 44 |
| Recommended Circuit Size (Amps.) | 20 |
| Drum Speed (RPM) | 1,720 |
There are no reviews yet
| Manufacturer warranty | ||
| 5 Year | ||
| Warranty details | ||
|
|
||
